XOR — Logical Exclusive OR

Opcode Instruction Op/En 64-Bit Mode Compat/Leg Mode Description
34 ib XOR AL, imm8 I Valid Valid AL XOR imm8.
35 iw XOR AX, imm16 I Valid Valid AX XOR imm16.
35 id XOR EAX, imm32 I Valid Valid EAX XOR imm32.
REX.W + 35 id XOR RAX, imm32 I Valid N.E. RAX XOR imm32 (sign-extended).
80 /6 ib XOR r/m8, imm8 MI Valid Valid r/m8 XOR imm8.
REX + 80 /6 ib XOR r/m8*, imm8 MI Valid N.E. r/m8 XOR imm8.
81 /6 iw XOR r/m16, imm16 MI Valid Valid r/m16 XOR imm16.
81 /6 id XOR r/m32, imm32 MI Valid Valid r/m32 XOR imm32.
REX.W + 81 /6 id XOR r/m64, imm32 MI Valid N.E. r/m64 XOR imm32 (sign-extended).
83 /6 ib XOR r/m16, imm8 MI Valid Valid r/m16 XOR imm8 (sign-extended).
83 /6 ib XOR r/m32, imm8 MI Valid Valid r/m32 XOR imm8 (sign-extended).
REX.W + 83 /6 ib XOR r/m64, imm8 MI Valid N.E. r/m64 XOR imm8 (sign-extended).
30 /r XOR r/m8, r8 MR Valid Valid r/m8 XOR r8.
REX + 30 /r XOR r/m8*, r8* MR Valid N.E. r/m8 XOR r8.
31 /r XOR r/m16, r16 MR Valid Valid r/m16 XOR r16.
31 /r XOR r/m32, r32 MR Valid Valid r/m32 XOR r32.
REX.W + 31 /r XOR r/m64, r64 MR Valid N.E. r/m64 XOR r64.
32 /r XOR r8, r/m8 RM Valid Valid r8 XOR r/m8.
REX + 32 /r XOR r8*, r/m8* RM Valid N.E. r8 XOR r/m8.
33 /r XOR r16, r/m16 RM Valid Valid r16 XOR r/m16.
33 /r XOR r32, r/m32 RM Valid Valid r32 XOR r/m32.
REX.W + 33 /r XOR r64, r/m64 RM Valid N.E. r64 XOR r/m64.

* In64-bitmode,r/m8cannotbeencodedtoaccessthefollowingbyteregistersifaREXprefixisused:AH,BH,CH,DH.

Instruction Operand Encoding

Op/En Operand 1 Operand 2 Operand 3 Operand 4
I AL/AX/EAX/RAX imm8/16/32 NA NA
MI ModRM:r/m (r, w) imm8/16/32 NA NA
MR ModRM:r/m (r, w) ModRM:reg (r) NA NA
RM ModRM:reg (r, w) ModRM:r/m (r) NA NA

Description

Performs a bitwise exclusive OR (XOR) operation on the destination (first) and source (second) operands and stores the result in the destination operand location. The source operand can be an immediate, a register, or a memory location; the destination operand can be a register or a memory location. (However, two memory operands cannot be used in one instruction.) Each bit of the result is 1 if the corresponding bits of the operands are different; each bit is 0 if the corresponding bits are the same.

This instruction can be used with a LOCK prefix to allow the instruction to be executed atomically.

In 64-bit mode, using a REX prefix in the form of REX.R permits access to additional registers (R8-R15). Using a REX prefix in the form of REX.W promotes operation to 64 bits. See the summary chart at the beginning of this section for encoding data and limits.

Operation

DEST ← DEST XOR SRC;

Flags Affected

The OF and CF flags are cleared; the SF, ZF, and PF flags are set according to the result. The state of the AF flag is undefined.

Protected Mode Exceptions

#GP(0) If the destination operand points to a non-writable segment.
If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit.
If the DS, ES, FS, or GS register contains a NULL segment selector.
#SS(0) If a memory operand effective address is outside the SS segment limit.
#PF(fault-code) If a page fault occurs.
#AC(0) If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.
#UD If the LOCK prefix is used but the destination is not a memory operand.

Real-Address Mode Exceptions

#GP If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit.
#SS If a memory operand effective address is outside the SS segment limit.
#UD If the LOCK prefix is used but the destination is not a memory operand.

Virtual-8086 Mode Exceptions

#GP(0) If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit.
#SS(0) If a memory operand effective address is outside the SS segment limit.
#PF(fault-code) If a page fault occurs.
#AC(0) If alignment checking is enabled and an unaligned memory reference is made.
#UD If the LOCK prefix is used but the destination is not a memory operand.

Compatibility Mode Exceptions

Same exceptions as in protected mode.

64-Bit Mode Exceptions

#SS(0) If a memory address referencing the SS segment is in a non-canonical form.
#GP(0) If the memory address is in a non-canonical form.
#PF(fault-code) If a page fault occurs.
#AC(0) If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.
#UD If the LOCK prefix is used but the destination is not a memory operand.