Opcode | Instruction | Op/En | 64-Bit Mode | Compat/Leg Mode | Description |
---|---|---|---|---|---|
F6 /7 | IDIV r/m8 | M | Valid | Valid | Signed divide AX by r/m8, with result stored in: AL ← Quotient, AH ← Remainder. |
REX + F6 /7 | IDIV r/m8* | M | Valid | N.E. | Signed divide AX by r/m8, with result stored in AL ← Quotient, AH ← Remainder. |
F7 /7 | IDIV r/m16 | M | Valid | Valid | Signed divide DX:AX by r/m16, with result stored in AX ← Quotient, DX ← Remainder. |
F7 /7 | IDIV r/m32 | M | Valid | Valid | Signed divide EDX:EAX by r/m32, with result stored in EAX ← Quotient, EDX ← Remainder. |
REX.W + F7 /7 | IDIV r/m64 | M | Valid | N.E. | Signed divide RDX:RAX by r/m64, with result stored in RAX ← Quotient, RDX ← Remainder. |
* In64-bitmode,r/m8cannotbeencodedtoaccessthefollowingbyteregistersifaREXprefixisused:AH,BH,CH,DH.
Op/En | Operand 1 | Operand 2 | Operand 3 | Operand 4 |
M | ModRM:r/m (r) | NA | NA | NA |
Divides the (signed) value in the AX, DX:AX, or EDX:EAX (dividend) by the source operand (divisor) and stores the result in the AX (AH:AL), DX:AX, or EDX:EAX registers. The source operand can be a general-purpose register or a memory location. The action of this instruction depends on the operand size (dividend/divisor).
Non-integral results are truncated (chopped) towards 0. The remainder is always less than the divisor in magnitude. Overflow is indicated with the #DE (divide error) exception rather than with the CF flag.
In 64-bit mode, the instruction’s default operation size is 32 bits. Use of the REX.R prefix permits access to additional registers (R8-R15). Use of the REX.W prefix promotes operation to 64 bits. In 64-bit mode when REX.W is applied, the instruction divides the signed value in RDX:RAX by the source operand. RAX contains a 64-bit quotient; RDX contains a 64-bit remainder.
See the summary chart at the beginning of this section for encoding data and limits. See Table 3-51.
Operand Size | Dividend | Divisor | Quotient | Remainder | Quotient Range |
---|---|---|---|---|---|
Word/byte Doubleword/word Quadword/doubleword Doublequadword/ quadword | AX DX:AX EDX:EAX RDX:RAX | r/m8 r/m16 r/m32 r/m64 | AL AX EAX RAX | AH DX EDX RDX | −128 to +127 −32,768 to +32,767 −231 to 231 − 1 −263 to 263 − 1 |
IF SRC = 0 THEN #DE; (* Divide error *) FI; IF OperandSize = 8 (* Word/byte operation *) THEN temp ← AX / SRC; (* Signed division *) IF (temp > 7FH) or (temp < 80H) (* If a positive result is greater than 7FH or a negative result is less than 80H *) THEN #DE; (* Divide error *) ELSE AL ← temp; AH ← AX SignedModulus SRC; FI; ELSE IF OperandSize = 16 (* Doubleword/word operation *) THEN temp ← DX:AX / SRC; (* Signed division *) IF (temp > 7FFFH) or (temp < 8000H) (* If a positive result is greater than 7FFFH or a negative result is less than 8000H *) THEN #DE; (* Divide error *) ELSE AX ← temp; DX ← DX:AX SignedModulus SRC; FI; FI; ELSE IF OperandSize = 32 (* Quadword/doubleword operation *) temp ← EDX:EAX / SRC; (* Signed division *) IF (temp > 7FFFFFFFH) or (temp < 80000000H) (* If a positive result is greater than 7FFFFFFFH or a negative result is less than 80000000H *) THEN #DE; (* Divide error *) ELSE EAX ← temp; EDX ← EDXE:AX SignedModulus SRC; FI; FI; ELSE IF OperandSize = 64 (* Doublequadword/quadword operation *) temp ← RDX:RAX / SRC; (* Signed division *) IF (temp > 7FFFFFFFFFFFFFFFH) or (temp < 8000000000000000H) (* If a positive result is greater than 7FFFFFFFFFFFFFFFH or a negative result is less than 8000000000000000H *) THEN #DE; (* Divide error *) ELSE RAX ← temp; RDX ← RDE:RAX SignedModulus SRC; FI; FI; FI;
The CF, OF, SF, ZF, AF, and PF flags are undefined.
#DE | If the source operand (divisor) is 0. |
The signed result (quotient) is too large for the destination. | |
#GP(0) | If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. |
If the DS, ES, FS, or GS register is used to access memory and it contains a NULL segment selector. | |
#SS(0) | If a memory operand effective address is outside the SS segment limit. |
#PF(fault-code) | If a page fault occurs. |
#AC(0) | If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3. |
#UD | If the LOCK prefix is used. |
#DE | If the source operand (divisor) is 0. |
The signed result (quotient) is too large for the destination. | |
#GP | If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. |
#SS | If a memory operand effective address is outside the SS segment limit. |
#UD | If the LOCK prefix is used. |
#DE | If the source operand (divisor) is 0. |
The signed result (quotient) is too large for the destination. | |
#GP(0) | If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. |
#SS(0) | If a memory operand effective address is outside the SS segment limit. |
#PF(fault-code) | If a page fault occurs. |
#AC(0) | If alignment checking is enabled and an unaligned memory reference is made. |
#UD | If the LOCK prefix is used. |
Same exceptions as in protected mode.
#SS(0) | If a memory address referencing the SS segment is in a non-canonical form. |
#GP(0) | If the memory address is in a non-canonical form. |
#DE | If the source operand (divisor) is 0 |
If the quotient is too large for the designated register. | |
#PF(fault-code) | If a page fault occurs. |
#AC(0) | If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3. |
#UD | If the LOCK prefix is used. |